The CommScope 307 VDSL Connector is a compact connector used to terminate and protect outside plant cables for voice, data, and video signals in the splice chamber of CommScope Integrated Cabinets, COSMIC Main Distributing Frames, CEVs, and Huts. The outside plant side of the connector is wired with a 40’ long CAT5e rated stub. The equipment side of the connector is a field of wire wrap terminals. The front face of the connector has room for 100 industry standard 5-pin plug in protector units, arranged in a 10 x 10 configuration.  

Note: Order protector units separately

Features and Benefits

• xDSL Compatible - Designed to pass signals up to VDSL rate. Provides an overall improvement in upstream and downstream maximum allowable bit Rates (MABR) and an approximate 10-fold reduction in megabit downstream loss as compared to standard 307 connectors.
• Compact Design - Designed to accommodate 2.1 five-pin plug-in protectors per square inch.

• Gold Plated Receptacles - Provide low contact resistance over the life of the connector to ensure high performance characteristics (all outside plant and equipment receptacles are gold plated).

• Circuit Identification - Clearly marked protector receptacle positions allow quick and easy circuit location.

Specifications

Physical dimensions . . . . . . . . . . . 6.10” W x 7.90” H x 3.25” D

Temperature range . . . . . . . . . . . –40º to +85º C

Recommended wire gauges . . . . . 24 AWG CAT5e cable

Equipment connection . . . . . . . . . Wire wrap field

Outside plant connection . . . . . . . Four 40', 24 AWG, 25 pair CAT5e cable stubs

How to Order

For customer service questions on Connector Blocks please call 1-877-687-4307 or send an email to rnolan@csmfg.com.

The CommScope 310 VDSL Connector is a compact connector used to terminate and protect outside plant cables for voice, data, and video signals on CommScope low-profile or tall main distributing frames. The connector is easy to install and extends seven inches from the vertical frame on which it is mounted. The connector is wired with CAT5e rated cables on both the outside plant and equipment sides. The left face of the connector has room for 100 industry standard 5-pin plug in protector units, arranged in two 5 x 10 arrays.   

Note: Order protector units separately

Features and Benefits

• xDSL Compatible - Designed to pass signals up to VDSL rate. Provides an overall improvement in upstream and downstream maximum allowable bit Rates (MABR) and an approximate 10-fold reduction in megabit downstream loss as compared to standard 310 connectors.
• Compact Design - Occupying half the vertical space of a 303 connector, this compact design allows you to increase the frame density on conventional distributing frames currently using 303 or earlier designed connectors.
• Gold Plated Receptacles - Provide low contact resistance over the life of the connector to ensure high performance characteristics (all outside plant and equipment receptacles are gold plated).
• Circuit Identification - Clearly marked protector receptacle positions allow quick and easy circuit location.
• Quick, Easy Installation - Mounts on the distributing frame with two screws to reduce the time you need to attach the connector to the frame.

Specifications

• Physical dimensions. . . . . . . . . . .  4.00” W x 9.38” H x 7.00” D

• Temperature range. . . . . . . . . . .  –40º to +85º C

• Recommended wire gauges. . . . . .  24 AWG CAT5e cable

• Outside plant connection. . . . . . . .  Four 40', 24 AWG, 25 pair CAT5e cable stubs

• Equipment connection. . . . . . . . . .  Either wire wrap field or 710 connection option

How to Order

For customer service questions on Connector Blocks please call 1-877-687-4307 or send an email to rnolan@csmfg.com.